|
Come to meet more than 70 businesses for cooperation
on over 100 projects!
| Project
Title |
Ceramic Encapsulating Assembly Line |
| Company |
Wuxi Microelectronics Institute |
| Project
Summary |
The domestic ceramic encapsulation shall be transferred from
inefficient semi-automatic production mode to automatic volume
production mode, and shall be developed from low-end products
to enhance production capacity and efficiency and produce top-end
high-powered products of high density. This project is aiming
at increasing capacity and efficiency of volume production and
solving the problem of single-unit operation mode. By adding
equipments for automatic die-attachment, automatic wire bonding
and automatic parallel seam welding, the output shall be increased
to 10 million pieces(calculated based on CLCC 8).
[ Detail
Information... ]
|
| Total
Investment |
The investment of project shall be
20 million yuan RMB for procurement of the equipment |
| Foreign
Investment |
10 million yuan RMB |
| Local
Investment |
Buildings,engineers,equipment, technology |
| Estimated
Production Value |
14 million yuan RMB per year |
| Estimated
Profit |
2 million yuan RMB per year |
| Construction
Period |
1 year |
| Background
of Implementing Company |
The institute has 595 employees. 390 of them, which accounts
for 65.5%, are engineers and technicians. The office for ceramic
encapsulation has 42 employees, including 5 senior engineers,
11 engineers and 8 engineer assistants. They have long been
engaged in R&D and microscale production of ceramic encapsulation.
This office has two production lines, one with a capacity of
4 million pieces of ICs and the other with a capacity of 300,000
pieces, its technological capacity and technical level takes
the leading position in China. The percent of passing according
to airtightness has kept over 99.9%. Generally speaking, the
office is competitive in technology development and production
management. The construction area covers 1000m2. The infrastructure
needn't rebuild in further development. The equipments value
7.5 million yuan RMB, most of which were produced in the 90s.
They are now all in use and operate in good condition individually.
|
| Contact |
Contact Person: Xu Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Web-site of Biofermentation Engineering
Products and Functional Foodstuffs |
| Company |
Science Park Co., Ltd. of Wuxi
University of Light Industry |
| Project
Summary |
The web-site is a large-scale special web-site for biopharmaceutical
raw materials, biofermentation engineering products, functional
foodstuffs and relative new material or equipment. Its target
is to become a "library" to obtain information in this
field, an "exchange" to transfer or purchase relative
products or technology, a "market" which engaged in
e-business , a "park" for investment which will find
investment and gain capital support from it.
[ Detail
Information... ]
|
| Total
Investment |
35 million RMB by two investment,
first investment: 10 million RMB, second investment: 25 million
RMB |
| Foreign
Investment |
Cash: 35 million RMB |
| Local
Investment |
Domain name register, partial professional
data base, know-how, sales ditch and user-developing |
| Estimated
Production Value |
1st year 2nd year 3rd year 4th year
5th year 4million 15.8million 41.5million 69.5million 96.3million |
| Estimated
Profit |
1st year 2nd year 3rd year 4th year
5th year -5.1 million -4.7 million 9 million 24 |
| Construction
Period |
Come into market by 3 or 5 year |
| Background
of Implementing Company |
The Science Park is a high-tech economic entity established by
4 shareholders in June, 1998, which includes Wuxi university of
Light Industry, Jiangsu Wuxi Liyuan Economic Development Zone,
High and New Technological Industrialization Association of Wuxi
and High and New Technological Industrialization Association of
Wuxi Suburb. Its registered capital is 7 million RMB.The Science
Park is mainly engaged in research and development, incubation,
transformation of lab achievements in the fields of bioengineering,
biochemical pharmacy, food, environmental protection, green agriculture,
science and technology information and so on.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Biological Active Products Processing
Engineering Technology Research Center of Jiangsu Province |
| Company |
Processing Engineering Technology
Research Center of Jiangsu Province |
| Project
Summary |
Science Park Co., Ltd. of Wuxi University of Light Industry Biological
Active Products Processing Engineering Technology Research Center
is a provincial level Bioengineering center. It was founded in
June 2000 by Science park co., Ltd. of Wuxi University of Light
Industry, Jiangnan University and so on with its registered capital
of 6.2 million RMB.The center will build two testing production
line for biofermentation engineering and extraction, separation
and purification of natural products. It will contain four Labs
on fermentation engineering, gene engineering, biology pharmacy
and research of natural products. We have invested 11.5 million
RMB as the first investment. If the second investment was fulfilled,
the total sales will reach 2 billion RMB per year, profit tax
will reach 50million RMB.
[ Detail
Information... ]
|
| Total
Investment |
Cash: 31.5 million RMB (first ) |
| Foreign
Investment |
20 million RMB |
| Local
Investment |
Property in stock, Item in research,
relative Patents |
| Estimated
Production Value |
200 million RMB |
| Estimated
Profit |
Net profit: 50 million RMB |
| Construction
Period |
1 year |
| Background
of Implementing Company |
The Science Park is a high-tech economic entity established by
4 shareholders in June, 1998, which include Wuxi university of
Light Industry, Jiangsu Wuxi Liyuan Economic Development Zone,
High and New Technological Industrialization Association of Wuxi
and High and New Technological Industrialization Association of
Wuxi Suburb. Its registered capital is 7 million RMB.The Science
Park is mainly engaged in research and development, incubation,
transformation of lab achievements in the fields of bioengineering,
biochemical pharmacy, food, environmental protection, green agriculture,
science and technology information and so on.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Catechin Monomer--- Grade II or The
Above New Anti-cancer Drugs |
| Company |
Science Park Co., Ltd of Wuxi University
of Light Industry |
| Project
Summary |
The project uses plenty of low-cost low-end tea or fannings as
raw materials. We are ready to develop and produce Grade II or
the above new anticancer drugs with independent property right
by using lead catechin monomer processing technology we have now
owned
[ Detail
Information... ]
|
| Total
Investment |
30 million RMB by two investment (1st
investment : 5 million RMB, 2nd investment :25 million RMB) |
| Foreign
Investment |
30 million RMB by two investment (1st
investment : 5 million RMB, 2nd investment :25 million RMB) |
| Local
Investment |
Technology, 2 Patents (No.CN1263083A)&(No.CN1253940A) |
| Estimated
Production Value |
320 million RMB.The other way of return:
transfer drug certificate (values 25 million or so), |
| Estimated
Profit |
120 million RMB |
| Construction
Period |
2 years |
| Background
of Implementing Company |
The Science Park is a high-tech economic entity established by
4 shareholders in June, 1998, which include Wuxi university of
Light Industry, Jiangsu Wuxi Liyuan Economic Development Zone,
High and New Technological Industrialization Association of Wuxi
and High and New Technological Industrialization Association of
Wuxi Suburb. Its registered capital is 7 million RMB.The Science
Park is mainly engaged in research and development, incubation,
transformation of lab achievements in the fields of bioengineering,
biochemical pharmacy, food, environmental protection, green agriculture,
science and technology information and so on.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Holland Intellectual Glasshouses |
| Company |
Wuxi Yangming Town Hi-tech Agriculture
Development Center |
| Project
Summary |
It shall be equipped with 11 hektare Holland Venlo Style intellectual
glasshouses and five hektare plastic greenhouses in succession.
The center shall adopt soilless culture technology and use organic
matrix to plant in factory mode. At present, this center is equipped
with 1 hektare Holland Venlo Style intellectual glasshouses and
five hektare plastic greenhouses in succession.
[ Detail
Information... ]
|
| Total
Investment |
12 million USD |
| Foreign
Investment |
10 million USD in cash, technology |
| Local
Investment |
equipment, land, buildings |
| Estimated
Production Value |
12 million USD |
| Estimated
Profit |
2 million USD |
| Construction
Period |
2 years |
| Background
of Implementing Company |
Yangming Town hi-tech vegetable demostration park has been engaged
in efficient soilless culture. It has over ten main products,
including nutmeg melon, cherry tomato and so on. Its sales per
year amounts to 10 million RMB.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Automotive Electronic Controlled Diesel
Fuel Injection Systems |
| Company |
Wuxi Research Institute of Applied
Science & Engineering of Southeast University |
| Project
Summary |
Electronic product series concerning diesel oil injection such
as electronic control unit (hereinafter referred to as ECU)of
allotting pump for diesel oil injection, ECU of high pressure
common-path control system, ECU of exhaust gas recirculation and
oil gun sensor, rotate speed sensor, temperature sensor, pressure
sensor, electronic rotating valve, high pressure solenoid valve,
electronic executor, which serve for oil pump, engine and automobile
factorys.
[ Detail
Information... ]
|
| Total
Investment |
100 million RMB (10 million RMB by
first investment) |
| Foreign
Investment |
cash, equipment, technology |
| Local
Investment |
cash, technology, land |
| Estimated
Production Value |
1 billion RMB(0.3 billion for Phase
One) |
| Estimated
Profit |
0.1 billion~0.3 billion£¨0.1 billion
for Phase One£© |
| Construction
Period |
2~3 year£¨1 year for Phase One£© |
| Background
of Implementing Company |
Its net asset amounts to 20 million RMB. And it has 20 experts
dedicated to product development. It has gained several technology
fruits, among which ECU of allotting pump for diesel oil injection,
oil gun sensor, electronic executor are about to put into mass
production.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Gasoline Engine and the Matings |
| Company |
Wuxi Planting Machine Manufactory |
| Project
Summary |
Developing and producing new fashioned mini-typed gasoline engine
and the matings, such as general mini-typed gasoline engine designed
for four stroke and two stroke, mini-typed water pump, sprayer,
reaper, cropper, mini-typed engine set and other industrial or
commercial products.
[ Detail
Information... ]
|
| Total
Investment |
3 million USD |
| Foreign
Investment |
Technology, fund, equipment, brand |
| Local
Investment |
Buildings, land, equipment, fund |
| Estimated
Production Value |
25 million USD |
| Estimated
Profit |
2~2.5 million USD |
| Construction
Period |
3 years |
| Background
of Implementing Company |
It has long been engaged in manufacture and sale of mini-typed
gasoline engine and the matings. It is furnished with perfect
production equipments for metal-cutting and heat-treating. It
can carry on independent metering and complete machine testing.
Located at bank of Taihu Lake, it has traffic facilities. It
has enough place for further development.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Special Form Cemented Carbide Products
by Injection Molding |
| Company |
Wuxi Hengfeng Cemented Carbide
Products Manufacturing Co., Ltd.&Wuxi Tungsten Co., Ltd. |
| Project
Summary |
For a long time the cemented carbide products is produced by cold
molding-sintering technology, so some thin wall products can't
be made in this way. Now our company has adopted a new technology
that is injection molding technology in production. First the
carbide power which is fixed with plastic cement will turn into
granules after refining. Second the granules will be proceed by
injection mode hot pressing on special equipments. Finally the
products will receive degrumming and sintering in vacuum sintering
furnace. Then some special-formed products such as thin wall multihole
wear resistant wares and decorative wares could be made in this
way, and these products are welcomed by customers with special
requirements.
[ Detail
Information... ]
|
| Total
Investment |
1 million USD |
| Foreign
Investment |
Funds (0.5 million USD or so) |
| Local
Investment |
Technology, funds, buildings and infrastructure |
| Estimated
Production Value |
12 million RMB ( its annual output
amounts to 30 tons |
| Estimated
Profit |
3.6 million RMB |
| Construction
Period |
1 year |
| Background
of Implementing Company |
These two companies are companies invested by the same company
in Hong Kong. It yields 30 tons cemented carbide products per
year. The sales income of 2001 amounts to 6.6 million RMB. And
its profit tax came out to be 7.2 million RMB. It has 3000 M2
workshop for further development. Its injection mode cemented
carbide has fullfiled mechanical testing and is now ready to
put into production. These two companies are willing to set
a new stock company producing this product by the investment
of the third party.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Packaging Machinery and Stacking Machinery |
| Company |
Wuxi Lima Chemical Machinery Manufacturing
Co., Ltd. |
| Project
Summary |
Introduce into foreign advanced technology of similar products,
stimulate the production of automotive quantificational packaging
machinery and automotive packaging assembly line and all kinds
of packaging and stacking machinery, develop market for these
products
[ Detail
Information... ]
|
| Total
Investment |
8 million RMB |
| Foreign
Investment |
Funds, technology |
| Local
Investment |
Funds, buildings, equipments |
| Estimated
Production Value |
30 million RMB |
| Estimated
Profit |
5 million RMB |
| Construction
Period |
2 years |
| Background
of Implementing Company |
The company is a state-owned company
which has 300 employees. Its registered capital amounts to 10
million RMB. Its sales income of 2001 amounts to 50 million
RMB. |
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Silicon-oil Torsional Vibration Damper
|
| Company |
FAW, Wuxi Diesel Engine Works |
| Project
Summary |
Along with the improvement of diesel engine used in vehicle more
attention is taken on the problem of torsional vibration of crankshaft.
The rubber damper can not satisfy the requirements of engine,
and the high-performance silicon-oil damper should be used. Now
there isn't any company which can manufacture this type of damper.
The target of first period of this project is one hundred thousand
sets per year and the target of second period will be upon the
demands of market.
[ Detail
Information... ]
|
| Total
Investment |
3 million USD |
| Foreign
Investment |
Funds and technology |
| Local
Investment |
Funds and buildings |
| Estimated
Production Value |
50 million RMB yuan(0.1 million sets) |
| Estimated
Profit |
5 million RMB yuan |
| Construction
Period |
1 year |
| Background
of Implementing Company |
This company which founded in 1943 is an engine production base
of China First Automobile Group. It has developed into one of
the large scale enterprises in China with total assets valued
at RMB 800'000'000.It occupies a total area of 500'000 M2 and
has more than 4'500 employees including over 500 technicians
and 80 senior engineers. It has institutes of Diesel engine
and Noduar castiron (National second class) with powerful capacity
of development. The company has been connected closely with
the international diesel engines procession.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Color Filter |
| Company |
Wuxi Electronics&Instruments
Industry Co. |
| Project
Summary |
Import manufacture technology and key equipment to produce color
filter, the major component for LCM(abbreviation of color liquid
crystal display module).
[ Detail
Information... ]
|
| Total
Investment |
60 million USD |
| Foreign
Investment |
fund, technology, equipment, brand |
| Local
Investment |
fund, land, buildings |
| Estimated
Production Value |
|
| Estimated
Profit |
|
| Construction
Period |
1.5 years |
| Background
of Implementing Company |
It is a state-owned company. Its total assets amounts to 630 million
RMB. Now it has 1000 employees. Its main product is LCM which
produced by complete LCM equipments from Sharp(Japan). The annual
output of this product is 1.5 million pieces£¬of which 98% for
export. Sales income of previous year amounts to 1.6 billion RMB.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Wide Band Telephone and Communication
Agreement of Wide Band Telephone Resource |
| Company |
Wuxi Wu Fang New Technology Co.,
Ltd. |
| Project
Summary |
Design and manufacture of wide band telephone, design of communication
agreement of wide band telephone resource
[ Detail
Information... ]
|
| Total
Investment |
2-5 million RMB |
| Foreign
Investment |
Fund and equipment |
| Local
Investment |
Technology and staff |
| Estimated
Production Value |
100 million RMB |
| Estimated
Profit |
10 million RMB |
| Construction
Period |
2 year |
| Background
of Implementing Company |
This company is engaged in mechanical and electronic design
since it was founded in 1996 with registered capital of 0.6
million RMB. It is a hi-tech company in which there are four
employees with doctor's degree, four with master's degree and
over twenty with bachelor's degree. It has joined its efforts
in fulfilling force testing of flying wires of Jiangyin Changjiang
River Grand Bridge, design of partial electrical motor of Siemens
Co., design of office automation software, design of automotive
modeling software and so on. At present its main project is
developing multifunctional Router.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Aloe products overall development |
| Company |
Wuxi Huihuang Bioscience Co., Ltd. |
| Project
Summary |
It has specialized in a series of foods and staffs, nurture and
cosmetic made by aloe, which is now popular with thousands of
people. It has become an individual industry in agriculture.
[ Detail
Information... ]
|
| Total
Investment |
100 million RMB |
| Foreign
Investment |
Funds, network |
| Local
Investment |
Raw materials, buildings, equipments,
technology, fund |
| Estimated
Production Value |
8 billion RMB |
| Estimated
Profit |
280 million RMB |
| Construction
Period |
2 year |
| Background
of Implementing Company |
It is formed by a research institute, which is supported by
experts of Beijing Industry and commerce University and Wuxi
Jiangnan University and a factory which is specialized in sale,
processing and planting of aleo products. Guangxi Shijielin
engineering factory, which shall engage in planting and processing,
has founded on January this year. At present, this company has
coated 3 thousand tons aloe per year.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Nm Crystalline Material Surgical Knife
of New Generation |
| Company |
Wuxi Kangning Electronic Medical
Apparatus developing Co., Ltd. |
| Project
Summary |
Surgical knife which blade is made of NM crystalline material
based on zirconium dioxide. 1.introduce into manufacturing engineering
technology of NM level zirconium dioxide toughening ceramic composite
materials 2. produce new generation NM crystalline material ophthalmologic
surgical knife 3.boost the sales of ophthalmologic surgical knife
and micro surgical knife in home market and market overseas.
[ Detail
Information... ]
|
| Total
Investment |
1.8-1.6 million USD |
| Foreign
Investment |
Raw materials, equipments, technology |
| Local
Investment |
Land, buildings, funds |
| Estimated
Production Value |
In three phases: Phase1. 20 million
RMB in 3 years Phase2. 60 million RMB in 5 years Phase3. 160 million
RMB in 8 years |
| Estimated
Profit |
30% of the production value |
| Construction
Period |
3-8 years |
| Background
of Implementing Company |
The company is one of high and new technology enterprises of Wuxi
City and executive unit of state torch project of 2001. It has
ever gained funds for technological innovation from state finance
department in 2000. It has gained certification of ISO9000 from
medical quality authentication center in Feb.,2001. Up to now,
this company has gained three patents with independent property
right.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Aflatoxin B1 ELISA Testing Kit |
| Company |
Jiangsu Province Microorganism
Research Institute |
| Project
Summary |
ELISA is a new testing technology which is simple, effective and
sensitive, Our testing kits is advanced and high-quality products
which can exclusively used in AFB1 testing of feed, foodstuff
and fermented products,etc.
[ Detail
Information... ]
|
| Total
Investment |
2 million USD |
| Foreign
Investment |
Funds |
| Local
Investment |
Technology, fixed assets |
| Estimated
Production Value |
8 million RMB |
| Estimated
Profit |
3 million RMB |
| Construction
Period |
1 year |
| Background
of Implementing Company |
At present our products has sold well throughout our country except
Taiwan and Tibet.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Biological and biochemical equipments |
| Company |
Wuxi Zhongxing Biochemical Engineering
Co., Ltd. |
| Project
Summary |
Cooperate in developing of international high and new technology
environmental protection equipments or biochemical equipments.
[ Detail
Information... ]
|
| Total
Investment |
|
| Foreign
Investment |
Target market developing, exclusive sale, technology transfer
or investment, advanced production equipments supply
|
| Local
Investment |
Landings, equipments, funds or procuration
of technology or equipments |
| Estimated
Production Value |
100 million RMB |
| Estimated
Profit |
25-30 million RMB |
| Construction
Period |
|
| Background
of Implementing Company |
This company has gained ISO9001 Certification. It is specialized
in 11 kinds of pressure vessels. It covers 40000 m2. It altogether
has 6 workshops.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Rubber Sealing Strip of doors and
windows of top-grade car |
| Company |
Jiangyin Haida Rubber and Plastic
Products Co., Ltd. |
| Project
Summary |
It is adopted continuously vulcanizing production lines to produce.
This product is widely used in doors and windows of top grade
cars or trains for sealing and tightening. And it has characteristics
of flame-resistance, low-smoking and low poison
[ Detail
Information... ]
|
| Total
Investment |
6 million USD |
| Foreign
Investment |
Technology(patent), funds |
| Local
Investment |
Land, buildings, equipments |
| Estimated
Production Value |
180 million RMB |
| Estimated
Profit |
3.6 million RMB |
| Construction
Period |
2 years |
| Background
of Implementing Company |
It is assessed as high and new technology enterprise of Jiangsu
Province and has gained ISO9002 certification. It is approved
by China Classification Society (CCS) and BV(French). It has
450 employees and its total assets amounts to 100 million RMB.
It has gained two-large scale continuously vulcanizing production
lines. Its business scope falls into the production of rubber
and plastic products used on ship, containers, underground,
train, tunnel, bridge or glass wall,etc. Its sales income of
last year turned out to be 80.01 million RMB, and its profit
tax amounts to 30.55 million RMB.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Energy Saving Nylon (PA66) Heat Insulated
Strip |
| Company |
Jiangyin Haida Rubber and Plastic
Products Co., Ltd. |
| Project
Summary |
Heat insulated strip, which is made by Nylon(polyamide) and glass
fiber, is used on doors, windows and glass wall in architecture.
It has the characteristic of low heat conductivity, corrosion
proof, aging resistance, elegant and strong, efficient and light.
Combined with midheaven glass and sealing material, it can make
heat preserved doors or windows.
[ Detail
Information... ]
|
| Total
Investment |
5 million USD |
| Foreign
Investment |
Technology(patent), funds |
| Local
Investment |
Land, buildings, equipments |
| Estimated
Production Value |
100 million RMB |
| Estimated
Profit |
20 million RMB |
| Construction
Period |
2 years |
| Background
of Implementing Company |
It is assessed as high and new technology enterprise of Jiangsu
Province and has gained ISO9002 certification. It is approved
by China Classification Society (CCS) and BV(French). It has 450
employees and its total assets amounts to 100 million RMB. It
has gained two large scale ontinuously vulcanizing production
lines. Its business scope falls into the production of rubber
and plastic products used on ship, containers, underground, train,
tunnel, bridge or glass wall,etc..Its sales income of last year
turned out to be 80.01 million RMB, and its profit tax amounts
to 30.55 million RMB.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Car Decorative Strip, Car Fender Strip
of New Generation, Polyurethane Car Damper Buffer Block and Other
Related Products |
| Company |
Jiangyin City Yanli Plastic Products
Co., Ltd. |
| Project
Summary |
1.The car decorative strip has been used on Santana made in China,
Red flag, CA180 and Hiace Microbus, etc.It has owned patent in
China and overseas. The product has been approved by National
Class Experts Appraisal Conference.2. Car fender strip of new
generation, which is mainly exported to Indonesia, has been used
on Hiace. 3. Ployurethane series products is under development,
one of them has granted as navy products.
[ Detail
Information... ]
|
| Total
Investment |
25 million RMB |
| Foreign
Investment |
Cash |
| Local
Investment |
Exist Assets |
| Estimated
Production Value |
150 million RMB |
| Estimated
Profit |
45 million RMB |
| Construction
Period |
1 year for mass production (because
the products has been fully developed) |
| Background
of Implementing Company |
It is assessed as excellent scientific private enterprise of
Province. Its products have been approved by National Light
Industry Bureau as products of high technology. It has taken
the leading position in this industry of our country. This company
has gained ISO9000 and QS9000 Certification. And PPM of it has
reached zero fault level.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
All-in-one Wirebar Production |
| Company |
Wuxi Xinke Metallurgic
equipment Co., Ltd. & Wuxi Xinke Automatic Control Institute |
| Project
Summary |
To make use of wire bar production line, which is now our main
products , to produce wirebar of our own. The annual output shall
reach 100'000 tons after this project is fulfilled. And a wholesale
market for wire bar shall be built.
[ Detail
Information... ]
|
| Total
Investment |
5 million USD |
| Foreign
Investment |
Funds (2.2 million USD) |
| Local
Investment |
Funds(2.8 million USD), land, buildings,
equipments, technology, brand |
| Estimated
Production Value |
373.5 million RMB |
| Estimated
Profit |
33.5 million RMB |
| Construction
Period |
1 year |
| Background
of Implementing Company |
This company is specialized in the production of series products
of steelwire heat treatment production lines which controlled
by computer automatically (drived by coal, oil, gas or electricity).
It has owned international advanced manufacturing technique
and furnished with automatic controlled production equipments.
It has gained 13 patents. This company which is the biggest
manufacturer in this industry of our country covers 10'000 M2.
Its total assets amounts to 48 million RMB and its fixed assets
amounts to 20 million RMB. There are now lots of experts in
this aspect working for it.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Cationic Polyarcylamide and Cationic
Monomer Project |
| Company |
Wuxi Xinyu Chemical
Plant |
| Project
Summary |
Annual output of Cationic Polyarcylamide
(PAM) reaches 5000 tons, annual output of Cationic Monomer of
Dimethylaminoethyl Methacrylate MC Quaternary (DMC) reaches 1500
tons, annual output of Cationic Monomer of Dimethyaminoethyl Acrylate
MC Quatewnary (DAC) reaches 1500 tons. [ Detail
Information... ]
|
| Total
Investment |
50 million RMB |
| Foreign
Investment |
Technology, funds |
| Local
Investment |
Land, buildings, funds |
| Estimated
Production Value |
200 million RMB |
| Estimated
Profit |
40 million RMB |
| Construction
Period |
1 year |
| Background
of Implementing Company |
At present this company, which has 100 employees has gained
ISO9002 authentication. Its total assets amounts to 20 million
RMB. It yields 600 tons Dimethylaminoethyl Methacrylate MC Quaternary
(DMC) per year, and the annual output of Cationic Polyarcylamideis
(PAM) is 1000 tons. The total production value of this company
in 2001 amounts to 20 million RMB.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Hydraulic Speed-control Clutch (Omega
Clutch) |
| Company |
Wuxi Gearbox Works |
| Project
Summary |
The products is extensively used in power plant, steel works and
high-powered blower fan etc. to raise efficiency and save energy.
[ Detail
Information... ]
|
| Total
Investment |
5 million RMB |
| Foreign
Investment |
Technology, funds |
| Local
Investment |
Buildings, equipments |
| Estimated
Production Value |
10 million RMB |
| Estimated
Profit |
2 million RMB |
| Construction
Period |
6 monthes |
| Background
of Implementing Company |
It has 40 employees. Its fixed assets amounts to 4 million RMB.
Its annual production value amounts to 8 million RMB. Its main
products which is certificated by ISO9001 includes hard gear
assembly, hydraulic clutch, hydraulic speed-control clutch and
so on.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Encloser and Pedestal of Flaky Ceramic
Component and SAW Appliance |
| Company |
Jiangsu Baotong Electronic
Technology Corporation |
| Project
Summary |
Design and production technique of encloser and pedestal of flaky
component
[ Detail
Information... ]
|
| Total
Investment |
|
| Foreign
Investment |
Introduce into technology and related
equipments (Interview preferred), |
| Local
Investment |
Landings, infrastructure, equipments,
Labor, funds |
| Estimated
Production Value |
200 million RMB |
| Estimated
Profit |
50 million RMB |
| Construction
Period |
1 year or so |
| Background
of Implementing Company |
The company is to produce flaky ceramic component and SAW appliance,
so the above mentioned products is urgently needed. In another
way, this project can supply a gap in this industry of our country.
Now this company, which has taken the leading position in this
industry of our country, is in full swing. Its products have
been selling well in foreign market. It has supplied products
to LG, Dayu, Panasonic and Toshiba in a regular term.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Production Expansion Project of Ship
Glass Series Products |
| Company |
Jiangyin Jingcheng
High-Quality Decorating Glass Company |
| Project
Summary |
Increasing the output of ship glass series products, expanding
exportation of products, enhancing the ratio for homemade parts
in shipbuilding industry
[ Detail
Information... ]
|
| Total
Investment |
10 million USD (86 million RMB) |
| Foreign
Investment |
4 million USD in cash |
| Local
Investment |
6 million USD including partial assets
and cash |
| Estimated
Production Value |
When this project is completed, the
estimated production value shall increase 200 million USD. |
| Estimated
Profit |
30 million RMB |
| Construction
Period |
1.5 year |
| Background
of Implementing Company |
The company which founded in 1995 is a large-scale professional
manufacturer. It covers 80'000 m2. Its total investment amounts
to over 100 billion RMB. It is specialized in further processing
of glass and furnished with international advanced equipments,
which could process 3.5 million m2 glass per year. Its quality
and quantity takes the leading position in our country. And
our products is competitive in home market and market overseas.
We are now looking forward for cooperation with us in production
expansion.
|
| Contact |
Contact Person: XU Jue, Chen Jie
Address: Room 701# No.168 Xueqian Street Wuxi City Jiangsu Province,
PRC.
Postal Code: 214001
TEL: 86-510-2704285
FAX: 86-510-2701275
E-mail: wxstec@pub.wx.jsinfo.net
|
|
.................................................................................
|
| Project
Title |
Automative CD, DVD Driver |
| Company |
Wuxi Wireless Co.,
Ltd. |
| Project
Summary |
Design, developing, manufacture and sale of automative CD, DVD
driver to industrialization scale with production capacity reaching
five hundred thousand.
[ Detail
Information... ]
|
| Total
Investment |
150 million RMB with its registered
capital amounts to 6 million USD |
| Foreign
Investment |
3.6 million USD |
| Local
Investment |
2.4 million USD |
| Estimated
Production Value |
600 million RMB |
| Estimated
Profit |
90 million RMB |
| Construction
Period | |
